Struct etherparse::PacketBuilderStep

pub struct PacketBuilderStep<LastStep> { /* fields omitted */ }

An unfinished packet that is build with the packet builder

Implementations

impl PacketBuilderStep<Ethernet2Header>

pub fn ipv4(
    self,
    source: [u8; 4],
    destination: [u8; 4],
    time_to_live: u8
) -> PacketBuilderStep<IpHeader>

Add an ip v4 header

pub fn ip(self, ip_header: IpHeader) -> PacketBuilderStep<IpHeader>

Add an ip header (length, protocol/next_header & checksum fields will be overwritten based on the rest of the packet).

Examples

With an IPv4 header:

let builder = PacketBuilder::
    ethernet2([1,2,3,4,5,6],
              [7,8,9,10,11,12])
   //payload_len, protocol & checksum will be replaced during write
   .ip(IpHeader::Version4(Ipv4Header::new(
       0, //payload_len will be replaced during write
       12, //time_to_live
       IpTrafficClass::Udp, //will be replaced during write
       [0,1,2,3], //source
       [4,5,6,7] //destination
    )));

With an IPv6 header:

let builder = PacketBuilder::
    ethernet2([1,2,3,4,5,6],
              [7,8,9,10,11,12])
   .ip(IpHeader::Version6(Ipv6Header{
        traffic_class: 0,
        flow_label: 0,
        payload_length: 0, //will be replaced during write
        next_header: 0, //will be replaced during write
        hop_limit: 4,
        source: [0;16],
        destination: [0;16]
    }));

pub fn ipv6(
    self,
    source: [u8; 16],
    destination: [u8; 16],
    hop_limit: u8
) -> PacketBuilderStep<IpHeader>

Add an ip v6 header

pub fn vlan(self, vlan: VlanHeader) -> PacketBuilderStep<VlanHeader>

Adds a vlan tagging header with the given vlan identifier

pub fn single_vlan(self, vlan_identifier: u16) -> PacketBuilderStep<VlanHeader>

Adds a vlan tagging header with the given vlan identifier

pub fn double_vlan(
    self,
    outer_vlan_identifier: u16,
    inner_vlan_identifier: u16
) -> PacketBuilderStep<VlanHeader>

Adds two vlan tagging header with the given vlan identifiers (also known as double vlan tagging).

impl PacketBuilderStep<VlanHeader>

pub fn ip(self, ip_header: IpHeader) -> PacketBuilderStep<IpHeader>

Add an ip header (length, protocol/next_header & checksum fields will be overwritten based on the rest of the packet).

Example IPv4

let builder = PacketBuilder::
    ethernet2([1,2,3,4,5,6],
              [7,8,9,10,11,12])
   //payload_len, protocol & checksum will be replaced during write
   .ip(IpHeader::Version4(Ipv4Header::new(
       0, //payload_len will be replaced during write
       12, //time_to_live
       IpTrafficClass::Udp, //will be replaced during write
       [0,1,2,3], //source
       [4,5,6,7] //destination
    )));

Example IPv6

let builder = PacketBuilder::
    ethernet2([1,2,3,4,5,6],
              [7,8,9,10,11,12])
   .ip(IpHeader::Version6(Ipv6Header{
        traffic_class: 0,
        flow_label: 0,
        payload_length: 0, //will be replaced during write
        next_header: 0, //will be replaced during write
        hop_limit: 4,
        source: [0;16],
        destination: [0;16]
    }));

pub fn ipv6(
    self,
    source: [u8; 16],
    destination: [u8; 16],
    hop_limit: u8
) -> PacketBuilderStep<IpHeader>

Add a ip v6 header

pub fn ipv4(
    self,
    source: [u8; 4],
    destination: [u8; 4],
    time_to_live: u8
) -> PacketBuilderStep<IpHeader>

Add a ip v4 header

impl PacketBuilderStep<IpHeader>

pub fn udp(
    self,
    source_port: u16,
    destination_port: u16
) -> PacketBuilderStep<UdpHeader>

pub fn tcp(
    self,
    source_port: u16,
    destination_port: u16,
    sequence_number: u32,
    window_size: u16
) -> PacketBuilderStep<TcpHeader>

impl PacketBuilderStep<UdpHeader>

pub fn write<T: Write + Sized>(
    self,
    writer: &mut T,
    payload: &[u8]
) -> Result<(), WriteError>

Write all the headers and the payload.

pub fn size(&self, payload_size: usize) -> usize

Returns the size of the packet when it is serialized

impl PacketBuilderStep<TcpHeader>

pub fn ns(self) -> PacketBuilderStep<TcpHeader>

Set ns flag (ECN-nonce - concealment protection; experimental: see RFC 3540)

pub fn fin(self) -> PacketBuilderStep<TcpHeader>

Set fin flag (No more data from sender)

pub fn syn(self) -> PacketBuilderStep<TcpHeader>

Set the syn flag (synchronize sequence numbers)

pub fn rst(self) -> PacketBuilderStep<TcpHeader>

Sets the rst flag (reset the connection)

pub fn psh(self) -> PacketBuilderStep<TcpHeader>

Sets the psh flag (push function)

pub fn ack(self, acknowledgment_number: u32) -> PacketBuilderStep<TcpHeader>

Sets the ack flag and the acknowledgment_number.

pub fn urg(self, urgent_pointer: u16) -> PacketBuilderStep<TcpHeader>

Set the urg flag & the urgent pointer field.

The urgent pointer points to the sequence number of the octet following the urgent data.

pub fn ece(self) -> PacketBuilderStep<TcpHeader>

Sets ece flag (ECN-Echo, RFC 3168)

pub fn cwr(self) -> PacketBuilderStep<TcpHeader>

Set cwr flag (Congestion Window Reduced)

This flag is set by the sending host to indicate that it received a TCP segment with the ECE flag set and had responded in congestion control mechanism (added to header by RFC 3168).

pub fn options(
    self,
    options: &[TcpOptionElement]
) -> Result<PacketBuilderStep<TcpHeader>, TcpOptionWriteError>

Set the tcp options of the header.

pub fn options_raw(
    self,
    options: &[u8]
) -> Result<PacketBuilderStep<TcpHeader>, TcpOptionWriteError>

Set the tcp options of the header (setting the bytes directly).

pub fn write<T: Write + Sized>(
    self,
    writer: &mut T,
    payload: &[u8]
) -> Result<(), WriteError>

Write all the headers and the payload.

pub fn size(&self, payload_size: usize) -> usize

Returns the size of the packet when it is serialized